31
5. Remove the two 1/4" x 3/4" Screws
(9), the two 5/16" x 1 1/2" Bolts (8),
and the two 5/16" Locknuts (38).
Remove the two 5/16" x 2 1/2"
Screws (7), the two 5/16" Lock
Washers (not shown), and the two
5/16" Flat Washers (not shown).
Remove the 1/4" x 2 1/2" Screw (85)
and the 1/4" Star Washer (89). Then,
remove the Idler Roller (63) and the
Drive Roller (113).
If you are replacing the Walking
Platform (44), go to step 6.
If you are replacing only the
Walking Belt (46),
remove the
Walking Belt and slide the new
Walking Belt onto the Walking
Platform (44). Follow steps 1–5 in
reverse order. Turn both 5/16" x
2 1/2" Screws (7) clockwise four
times only.
Go to step 7.
6. Remove the Walking Belt (46) and
the Walking Platform (44) from the
treadmill. Then, remove the Walking
Belt from the Walking Platform.
Remove the twelve 3/8" x 1 1/2" Bolts
(5) and the 3/8" Locknuts (34). Slide
the Rear and Front Platform Brackets
(47, 48) off the Walking Platform (44).
Slide the Rear and Front Platform
Brackets (47, 48) onto the new
Walking Platform (44).
Follow steps 1–6 in reverse order. If
you are replacing the Walking Belt
(46), use the new Walking Belt. Turn
the 5/16" x 2 1/2" Screws (7) (see
step 5) clockwise four times only.
Go
to step 7.
6
34
34
34
5
5
5
5
46
47
44
48
34
5
38
8
114
46
7
7
8
114
9
9
85, 89
63
113
