27
HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to update the console firmware, view machine
information, view a button’s keycode, register the exer-
cise bike, and enter a club token.
1. Select the settings main menu.
See step 1 on page 24.
2. Select the maintenance mode.
In the settings main menu, touch the Maintenance
button to enter the maintenance mode.
The maintenance mode main screen will show
information about the model and version of the
console.
3. Update the console firmware.
For the best results, regularly check for firm-
ware updates.
Touch the Firmware Update button to check for
firmware updates using your wireless network. The
update will begin automatically.
To avoid damaging the exercise bike, do not
turn off the power while the firmware is being
updated.
Note: Occasionally, a firmware update may cause
your console to function slightly differently. These
updates are always designed to improve your exer-
cise experience.
The screen will show the progress of the update.
When the update is complete, the exercise bike will
turn off and then turn back on. If it does not, press
the power switch into the off position. Wait for sev-
eral seconds, and then press the power switch into
the reset position. Note: It may take a few minutes
for the console to be ready for use.
4. View machine information.
Touch the Machine Info button to view information
about your exercise bike. After you view the infor-
mation, touch the back button.
5. Find keycodes.
This option is intended to be used by service
technicians to identify whether a certain button is
working correctly.
6. Register the exercise bike on iFit.com.
This option is intended to be used by fitness club
owners to view and track the usage history of the
exercise bike on iFit.com.
Touch the Register Equipment button, enter your
club token, and then touch the Submit button.
7. Enter club token.
This option is intended to be used by fitness club
owners. Touch the Enter Token button, enter your
club token, and then touch the Submit button.
8. Exit the maintenance mode.
To exit the maintenance mode, touch the back
button.
