User Manual: HotDog
TM
Veterinary Controller Page 7
1.
Plug in Port A
for a single Warming
Blanket.
When the cable is properly inserted
into Controller, an audible sound
indicates that the Blanket is properly
connected and the port icon
illuminates on the screen.
Note: The C, D and E ports are not
available for Veterinary use.
2.
Plug in Port B
for an additional
Warming Blanket.
When the cable is properly inserted
into Controller, an audible sound
indicates that the Blanket is properly
connected and the port icon
illuminates on the screen.
Note: The C, D and E ports are not
available for Veterinary use.
Temperature Setting Display
When a warming blanket is plugged into a
port, an audible beep will sound, and the
display will show two dashes. Press the
Temperature Adjust Button for the desired
port until the desired temperature is
displayed. The temperature can be selected
in one-degree increments from 37-43°C for
Ports A and B. The designated warming
temperature will flash until the selected
temperature is achieved; at which time the
selected temperature will steadily display
.
C, D and E are Not
available for veterinary use
C, D and E are Not
available for veterinary use
