User Manual: HotDog
TM
Veterinary Controller Page 6
How to Operate the Controller
(For information about Warming Blankets, refer to the Warming Blanket Instructions for Use.)
1.
Plug the gray power cord into the Controller and the electrical outlet.
2.
Turn the Controller on. The power switch is located on the back of the Controller.
3.
Temperatures will be displayed in Celsius.
4.
Remove the Blanket from the shipping carton. The serial number and 2-year expiration date are
written on the yellow cable extending from the Blanket.
5.
Connect the yellow cable to the short yellow cable off the side of the Blanket by aligning both red
dots and pushing straight in. Do not twist!
6.
Position and secure the Blanket.
7.
Insert the Blanket’s connecting cable into the proper port on the Controller. Do not twist! (Figure
2.)
WC52R (VET)
Dual Port
Port
Color
Device
A and B
Yellow
Warming Blanket
