manualshive.com logo in svg

HotBrick VPN 800, User Manual

Share
Download
HotBrick VPN 800 User Manual Download Page 53

HotBrick Network Solutions 

Page 49 

Session Limit 

This new feature allows to drop the new sessions from both WAN and LAN side. If the new 

sessions number are exceed the maximum sessions in a sampling time. 

 

 

Figure 5-3: Session Limit

 

 

 

Session Limit 

 

Sampling Time 

The period to count the new session. Only those new sessions 
occurred in the most recently sampling time were be count for limit 
checking.(Default is 400 mil-sec) 

Maximum of Total New 
session 

If the number of new sessions for system exceed the maximum in the 
Sampling Time. Any new sessions in the system will be dropped. 
(Default: 65535 session/sec) 

Maximum of New 
Sessions for Host  

If the number of new sessions for the host exceeds the maximum in the 
sampling time. Any new session of the host will be dropped. (Default: 
session/sec) 

Maximum of Dropped 
New Sessions for Host 

If the number of dropped new sessions for the host exceeds the 
Maximum in the sampling time, any new session of the host will be 
dropped for the pause time. 

Pause Time  

Within the pause time, no new session of the suspended host could be 
served by system.( Default is 5 minutes) 

 

Summary of Contents for VPN 800


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands