�
Operation and Setup
Working Parameters Display
Battery Type-string Number
Current & Completion
--�
Percentage
Task Status
Present
Current
Capacity
Charged
Operation Time
Present
---
Power
Current Total
Battery
Voltage
0
3.999V
8
3.994V
8
3.998V
0
3.996V
8
3.gg7
v
___
Cell Voltage
0
3.995V
Discharging
Discharging Status Simple Operation
1. Connect power supply to the AC or DC port of the charger, wait for the system
to complete the self-checking. connect the battery to the charger in the standby interface;
2. In the standby state, short press Okey to pop up the "Task Settings" menu, set the
task to "Discharge" , adjust the task parameters, and short press O key to start the task;
Press /\ key or V key during operation can switch the display information in the lower half of the screen,
which are cell voltage and run data, the cell voltage and internal resistance can only be displayed in the
mode of balance charging.
3. When the discharge task is executing, short press the O key to pop up the "Adjust
Task" menu, will adjust the discharge current, long press the O key can stop the
current task;
4. Enjoy.
-
HGT.;
I
HG PRO AC/DC Smart Charger
