Chapter 2
Chapter 2
Getting Started
THE HOT WHEELS
®
ACCELERATOR
operates on 3 “AA” size batteries or a 6V
AC adaptor.
Battery Installation
1. Make sure the unit is turned off.
2. To open the battery cover, remove
the screw on the back of the unit
with a coin.
3. Insert 3 "AA" size batteries.
(Note the correct polarity: +, - ).
4. Replace the cover.
AC Adaptor Connection
Please turn off the unit before
plugging in the AC adaptor to
prevent damaging the unit.
Plug the adaptor into the adaptor
jack (center positive type) located at
the back of the unit. Plug the adaptor
into a wall outlet.
3
Caution
• Do not mix different types of batteries or old and
new batteries together.
• Only use batteries of the same or equivalent type
as recommended.
• Remove all batteries when replacing.
• Remove batteries from the unit if the unit is not
going to be used for long periods of time.
• Do not dispose of batteries in fire.
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries are to be removed from
the toy before being charged.
• Rechargeable batteries are only to be charged
under adult supervision.
• Remove exhausted batteries from the toy.
• Do not short-circuit the supply terminals.
Caution
• The unit must not be connected to a power supply
greater than 6V.
• Only use the recommended adaptor.
• The adaptor is not a toy.
• Do not short-circuit the supply terminals.
• Toys liable to be cleaned with liquid are to be
disconnected from the power source before cleaning.
• Due to AC/DC Adaptor Connection - Not suitable for
children under 3 years to operate without adult supervision.
