Hot Shot HS-360-PRO/HS-360-PRO-15A User Manual R1.1 | 4
SAFETY RECOMMENDATIONS
Your heating element is made from Kanthal Ni-Chrome wire, allowing cold air to enter a hot oven will harden
your element and make it become brittle. Never use compressed air or fans to force cool the oven, always close
the door and let the oven cool on its own, this will keep your heating element annealed.
Our cool touch technology, with the fan running, should keep the outer surface within 20°C of room ambient
temperature.
1. Install on a 15 or 20 amp 120V circuit (will depend on what’s ordered).
2. Do not use the oven to cure paint or any other solvent borne products.
3. Do not use the oven for powder coat.
4. Use in a well ventilated area.
5. Wear protective clothing and protect thyself from burns.
6. Do not unplug the unit till it has fully cooled down.
7. Do not EVER put magnesium in the oven.
8. Do not exceed 2000°F.
9. Do not block any vents.
10. Keep the fan exhaust at least 3 inches from any wall or obstruction.
11. In the event the oven overheats, the oven will automatically shut down. Please contact our office at
262-361-4912 to work with our team on resetting your oven if shut down occurs.
12. Use caution when loading and unloading kiln while kiln is in operation.
13. Do not leave kiln unattended.
14. The thermocouple works best if its not crowded against your work. Give it as much room as practically
possible. Avoid blocking the thermocouple from the sides, particularly both sides at once.
