Hostess HM350A Instructions For Use Manual Download Page 8

 

8

TECHNICAL SPECIFICATION 

 
Electricity Supply: 220 – 240V 50Hz 
Power: 600W 
Capacity: 150 – 350ml cold beverage 
 

UK WIRING INSTRUCTIONS 
 

The wires in the mains lead are coloured in accordance with the following code: 
 
 

 

BLUE   

 

 

 

NEUTRAL 

 

 

BROWN 

 

 

 

LIVE 

  GREEN/YELLOW 

 EARTH 

 
As the colours of the wire in the mains lead of this appliance may not correspond with the colour 
markings identifying the terminals on your plug, proceed as follows: 
The wire which is coloured BLUE must be connected to the terminal which is marked with the 
letter N or coloured black. 
The wire which is coloured BROWN must be connected to the terminal which is marked with the 
letter L or coloured red. 
The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked 

with the letter E or 

  and is coloured GREEN or GREEN/YELLOW 

WARNING: THIS APPLIANCE MUST BE EARTHED 

 

ENVIRONMENTAL NOTE 

 

This appliance is marked according to the European Directive 2012/19/EU 
on Waste Electrical and Electronic Equipment (WEEE). 
This guideline is the frame of a European wide validity of return and 
Recycling on Waste Electrical and Electronic Equipment. 

 

 

If you encounter any problems with your Hostess Milk Frother, please contact the appropriate 
Service department. 
If the Milk Frother was bought in the UK, please contact: 
 
Hostess Customer Service Department 
Crosslee plc 
Halifax 
West Yorkshire 
HX3 8DE 
Telephone: 01422 203963 
 
If the Milk Frother was bought outside the UK, please contact your retailer. 

                  0101 

194 

15471 

Summary of Contents for HM350A









Reviews: