6
CHANGING THE BLENDER/STIRRER
The Milk frother is supplied with two Foam Blenders. These will produce a frothy drink. The Hot
Milk Blender can be used to produce a hot drink that is not frothy.
To change the blender, pull the blender upwards, at an angle to the base, to remove it from the
spigot in the base of the pot. Position the required blender onto the spigot and then press firmly
downwards. Ensure that the blender rotates freely on the spigot.
The spare blenders are located on the underside of the base unit.
CLEANING & MAINTENANCE
Before cleaning the base unit after use, wait for the appliance to cool down.
When cleaning the pot, use a sponge or a soft brush together with normal washing up liquid.
Warning: Be aware of the spigot in the base of the pot when cleaning by hand.
Do not use any solvents or abrasive detergents. Sharp or hard instruments or steel wool is strictly
forbidden.
When cleaning the base unit, disconnect from the power supply and just use a damp cloth. Take
care not to wet any electrical parts. Do not wash the base unit in a dishwasher.
Fig 14 Remove the blender from the bottom of the pot and clean thoroughly.
Fig 15 The pot can be cleaned with warm soapy water or washed in a dishwasher.
Fig 16 Do NOT pour water into the base unit.
Fig 17 The base unit must NOT be immersed in water.
Fig 18 The spare blender and stirrer are stored under the base unit.
