1
In the context of this manual, the term "sanitizing water" refers to
acidic water and "cleaning water" refers to alkaline water.
IMPORTANT
1. In order to carry out safe and proper installation of the
product, please read this booklet carefully beforehand and
follow the instructions contained within.
2. On completion of the installation, start up the electrolyzer to
check for any abnormalities, and instruct the user on how
to use and maintain the electrolyzer in accordance with the
Instruction Manual.
3. This booklet should be handed over to the user after the
installation and be preserved by the user together with the
Instruction Manual for any further consultation that may be
necessary.
WARNING
1. The installation must be carried out by qualified personnel,
in accordance with current regulations, according to the
manufacturer’s instructions.
2. This electrolyzer is not intended for outdoor use (including
under canopy). Exposure to rain may cause electric leak or
shock. Direct sunlight can damage the plastic tank exterior,
resulting in cracks and water leaks.
3. Ensure adequate ventilation. Hydrogen gas or chlorine gas
may cause health problems.
4. Run separate vent pipes to the outside for sanitizing and
cleaning water lines. Hydrogen gas or chlorine gas may
cause health problems.
1. CONSTRUCTION
[a] EXTERIOR
[7] Drain outlet (left)
Drains sanitizing water in flush cycle.
[8] Salt water hose
[9] Salt water tank (accessory)
[10] Nozzle hose (accessory)
[11] Nozzle
[12] Sanitizing water outlet (G1/2 male)
[13] Drain outlet (right)
Drains cleaning water during dispensing action and sanitizing water in
flush cycle.
[b] OPERATION PANEL
[1] Power switch (earth leakage circuit breaker)
[2] Water inlet (G3/4 male)
[3] Power cord (1 phase 220-240V)
[4] Dispensing sensor
Senses a hand or object to start and stop dispensing electrolyzed
water without using the dispense button (default setting: portion
control mode).
[5] Control panel
Contains buttons and lamps for electrolytic cell function settings. See
“[c] CONTROL PANEL”.
[6] Operation panel
Indicates the operating conditions of the unit.
[1] Flush lamp (red)
The electrolytic cell and cleaning water circuit are being flushed while
this lamp is on. Starts flashing 5 minutes before flush cycle begins.
[2] Error lamp (red)
Flashes or illuminates in case of trouble.
[3] Add salt water lamp (red)
Comes on when the salt water tank is running out of salt water.
[4] Reset button
After adding salt water in the salt water tank, press this button. The
add salt water lamp starts flashing, and salt water is supplied to the
unit.
[8]
[7]
[9]
(Bottom)
[12]
[13]
To sink
[10]
[11]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[1]
[2]
[3]
[4]
(Front)
[5]
[6]
水
