11
6. Confirm Rail Cover Operation
The rail cover's rear pins are inserted into the rear slots on both brackets. Use the rail
cover's front pins and the notches on the brackets to place the rail cover in the open
position. You can use either set of notches. The hollow side of the rail cover faces down.
See Fig. 4.
WARNING! When the rail cover is open, make sure the rear pins on both
sides of the rail cover are securely in the rear slots and the front pins are resting
securely in the notches. Otherwise, the rail cover could close suddenly and cause
injury.
7. Confirm Rail Dividers and Pans are in Place
Confirm rail dividers and 1/3 size pans included with the appliance are in place.
See Fig. 5.
• The entire rail must always be covered by rail dividers and pans. Otherwise, the
appliance will not cool pro
perly.
•
Use only pans up to 6" (15 cm) deep. Do not use damaged rail dividers or pans.
• Wash the pans before use.
• At startup, leave the pans empty until the appliance cools down.
• On some models, an extra rail divider is included. Use the extra rail divider if a gap
remains after all pans and all other rail dividers are in place. Some pans on the market
are slightly larger and do not require the extra rail divider.
Pans
Rail Dividers
Fig. 5
Fig. 4
Rear Pin
Rear Slot
Front Pin
Notches
Rail Cover
Model Shown: PR67A
