DISCONNECT UNIT FROM POWER SUPPLY BEFORE DOING ANY SERVICE
Instructions to Replace Compressor.
18. Install the four nuts
that hold in place the
compressor to the
base rails using a
7/16” socket ratchet.
19. Proceed to braze the
service, discharge and
suction tubing.
20. Braze the filter to the condenser
discharge line and to the capillary
tubing.
Do not over heat the body of the filter
and take great care not to block the
capillary tubes with solder material. The
filter dryer must be installed in a vertical
position with the capillary tube inlet at
the bottom of the filter.
21. Please review the
slides 22 through 26 to
install the relay,
overload protector and
starting capacitor.
Summary of Contents for RM-49
Page 1: ...SERVICE MANUAL FOR MODEL RM 49...
Page 37: ......
