13
ENGLISH
Allow the clearance specified below for proper air circulation and ease of
maintenance and/or service should they be required.
5. INSTALLATION
CAUTION
Incorrect installation can cause harm to people, animals or other items, for which the manufacturer cannot be held responsible.
1) Lay the storage bin on its rear side carefully to prevent damage. Secure the four adjustable legs (bin accessory) into the four
tapped holes on the underside of the bin.
2) Position the storage bin in the selected permanent position, and level it in both the left-to-right and front-to-rear directions.
3) Remove the icemaker panels. The rear panel is not required to be removed for installation. See “3. UNPACKING”.
4) Place the icemaker on the top of the storage bin by holding the bottom.
5) Remove the two bolts securing the bottom of the icemaker’s rear panel.
6) Secure the icemaker to the storage bin at the rear, by using the mounting brackets provided and the bolts removed.
7) Seal the seam between the icemaker and the storage bin with food grade sealant.
8) Remove the drain pipe collar and drain pan. Secure the bin control switch to the mounting frame using the two bolts provided.
Fix the bin control switch wiring with the three nylon ties. Place the ice chute on the unit frame, and re
fi
t the drain pan in its
correct position.
9) Replace the icemaker panels in their correct position.
Adjustable Leg
Bottom
Adjustable Leg
30cm
30cm
