5
2A9584-010
20) At the front of the icemakers, locate the lower and upper icemakers front mounting holes. See Fig. 11. To prevent plastic
shavings from entering the ice storage bin area during drilling, place a large pan or cloth under the icemakers front
mounting holes. Using the lower icemakers mounting hole as a guide, drill a 3/8" (10 mm) hole up through the top
plastic spacer between the upper and lower icemaker. See Fig. 12.
21) Secure the upper icemaker to the lower icemaker using the remaining hex bolt w/washer and nut provided in this kit.
See Fig. 13.
22) Place the wire saddles provided in this kit, into the upper icemaker evaporator frame. See Fig. 13.
Hex Bolt
w/Washer
Nut
Upper Icemaker
Lower Icemaker
Fig. 13
Front Mounting Holes
Upper and Lower
Icemakers Front
Mounting Holes
Top Plastic Spacer
Top Plastic Spacer
Drill 3/8" (10 mm) Hole
Front
Mounting
Holes
Upper
Icemaker
Lower Icemaker
Fig. 11
Fig. 12
Large Pan
or Cloth
Ice Storage Bin
Upper
Icemaker
Lower
Icemaker
Upper Icemaker
Lower
Icemaker
Wire Saddles
Upper
Icemaker
Evaporator
Frame
Lower
Icemaker
