12
Fig. 9
Main Shelf
Center Shelf
Main Shelf
Clip
Top View
Front View
4. Check the Refrigeration Circuit
• Visually check that the refrigerant lines do not rub or touch other lines or surfaces and
that the fan blades turn freely.
• Check that the compressor is snug on all mounting pads.
5. Position and Level the Appliance
• Appliances with legs: Level the appliance in both the front-to-back and side-to-side
directions. Turn the bottom portion of the legs for height adjustment.
• Appliances with casters: Place the appliance in its final location, then lock the front
casters.
6. Install the Shelves (if applicable)
Shelf support clips are provided in the accessory pack.
1) Place the shelf support clips into the pilasters. Indexing holes are provided on the
pilasters in evenly spaced intervals to assist you in positioning the support clips at the
same height.
2) 2 and 3 section appliances may be equipped with center shelves which should be
installed after the main shelves are in place. The center shelf kit contains additional
clip(s) which support the center shelf when the main shelves on one side of the cabinet
are not aligned with the main shelves on the other side of the cabinet. See Fig. 9.
WARNING! Without this additional support, the shelf assembly could tip under
adverse loading conditions.
