11
8) Using 2 screws provided in the accessory bag, attach the reservoir to the rear of the
unit. See Fig. 8.
Fig. 6
Float Switch
Float Switch
Mounting Bracket
5) Replace the rear panel and rear cover in their original positions.
6) Remove the suction hose bracket from the accessory bag. Using 1 screw provided in
the accessory bag, attach the suction hose bracket to the rear of the appliance. Secure
the suction hose using the suction hose bracket. See Fig. 6.
NOTICE!
Confirm that the
tip of the suction hose extends 3/8" (10 mm) below the suction hose bracket and
that the suction hose is not pinched or kinked.
3/8" (10 mm)
Suction Hose
Bracket
Suction Hose
Float Switch
7) Next, Secure the float switch to the pre-installed float switch mounting bracket.
See Fig. 7.
NOTICE!
Confirm that the float switch moves freely.
Suction Hose
Bracket
Suction Hose
Fig. 7
Rear Cover
Rear Cover
Reservoir Mounting Screws
Fig. 8
Reservoir
