background image

9

CHECK FOR SHIPPING DAMAGE

Prior to leaving the factory, each cabinet is throughly inspected and 

performance tested to assure proper operating temperatures.

Check the crate thoroughly for signs of shipping damage

.  If external 

damage exists, internal damage is also probable.  Uncrating should be done 

while the carrier´s representative is present.  Otherwise, the equipment 

should be uncrated as soon as possible, preferably within five (5) days.  

The  manufacturer  is  not  responsible  for  in-transit  damage  and  the 

consignee must file any required damage claims directly with the carrier.

If the damage is severe and obvious, write a brief description of the evidence 

on the carrier’s delivery receipt, and above the carrier representative’s 

signature.  Call the distributor or dealer immediately, indicating that the 

cabinet was damaged.

DANGER

: Risk of Fire or Explosion due to Flammable Refrigerant Used. 

Follow Handling Instructions Carefully in Compliance with U.S. Government 

Regulations.

If no obvious crate damage is present, within two hours of receiving the 

cabinet from the carrier, remove the packaging to inspect for concealed 

damage.

1. 

If concealed damage is found, call the carrier immediately, 

save all 

crating materials

, and file the necessary freight claim with the carrier.

Check for accesories:

  Check that the shelves are inside the refrigerator, 

including the four clips or supports for each shelf.

WARNING

•  This appliance must be installed in accordance with all applicable national, 

state, and local regulations.

•  Appliance is heavy. Use care when lifting or positioning. Work in pairs 

when needed to prevent injury or damage. 

•  Do not tilt the appliance more than 45°.

Installation instructions

Summary of Contents for HR24C





















Reviews: