12
1.
Plug in the electrical cord of the unit to a wall outlet, following the
recommendations about electrical installation in this manual.
2. Allow the appliance to cool down to setpoint before loading with
product.
3. When placing products in the cooler, you should leave small gaps
between one and the other to assure free circulation of air inside the
cabinet.
4. Do not leave the door open for extended periods of time, to avoid
increased temperature of the products.
The temperature of a cooler should be between 34°F to 40°F.
START UP THE COOLER
INSTALLING THE SHELVES
WARNING
Never try to move a loaded shelf, remove everything from the shelf
before moving. Use both hands when moving the shelf.
To add or remove a shelf
Remove stored product from the shelf. Do not try to remove a loaded
shelf from the appliance. Grasp the shelf front with both hands, rotate
the front upward and lift out. Shelves and shelf clips are packed inside
the cabinet prior to shipment. After selecting the appropriate spacing
inside the cabinet, install shelf clips by inserting top of clip inside the
pilaster and then press the lower section of the clip while pushing
inwards until it snaps into place. Repeat until all clips are in desired
location. Place shelf on clips checking that all four corners of shelves
are leveled and supported by the four shelf clips.
Loading tips and suggestions
Your appliance is equipped with a shelf system, composed of three
reinforced heavy duty shelves and twelve shelf clips (four per shelf), which
provides maximum adjustability.
