ENGLISH
17
3) When preparing the unit for long storage, clean
the cabinet interior and door gaskets, dry them
thoroughly and store the unit in a dry place.
III. MAINTENANCE
IMPORTANT
1. Before carrying out any cleaning or
maintenance operations, unplug the unit.
2. D o n o t t o u c h o r w e t t h e m a c h i n e
compartment parts. This could result in
failure or breakdown.
3. To prevent possible damage, do not clean
the plastic parts with water above 40°C or in
a dishwasher.
1. INTERIOR, EXTERIOR, SHELF
* Clean the interior and exterior at least once a week
for sanitary use.
* Clean off the interior and exterior with a soft cloth
soaked in cold or warm water containing the proper
amount of neutral cleaner and wrung dry. Do not
use a water jet to clean the machine compartment.
* Chemical agents other than neutral cleaner might
cause damage to the interior and exterior surfaces.
* Any remaining detergent will damage metal or
plastic surfaces. Use a soft cloth dampened with
warm water to wipe it off.
* Do not use the following items. They could damage
painted or plastic surfaces:
Polishing powder, alcohol, thinner, benzine, acidic
or alkaline detergent, hot water, petroleum, soap
powder, metal scourer or brush, etc.
Especially detergent to clean grease on ventilator
or microwave.
Note: Some solutions other than the above may
also damage painted or plastic surfaces.
Immediately stop using such solutions if
they cause any problems.
* The door gasket and its contact surface get
soiled easily. Clean every surface of these parts
thoroughly. Remnants of food will accelerate aging.
* Use a cloth to wipe off any water staying inside the
cabinet.
2. AIR FILTER
IMPORTANT
To prevent deformation, do not wash the air
filter with hot water above 40°C.
Plastic mesh air filters remove dirt or dust from the
air, and keep the condenser from getting clogged.
If the filters get clogged, the refrigerator/freezer’s
performance will be reduced.
Check the filters at least twice a month. When
clogged or when the temperature controller shows
“cH”, use warm water and a neutral cleaner to wash
the filters. Do not operate the unit with the air filters
removed, or the condenser will get clogged, resulting
in failure.
1) Open the front panel and remove the air filter. To
prevent injury, do not touch the condenser fins
directly.
2) Wash the air filter carefully with cold or warm
water containing the proper amount of neutral
cleaner. Rinse and dry the air filter thoroughly.
3) To refit the air filter, attach it to the guide at the top
of the condenser and put the tabs into the slots in
the refrigeration unit base.
Fig. 16
Fig. 17
Air Filter
Front Panel
Summary of Contents for HF-128MA
Page 13: ......
