2
ENGLISH
Top Panel
Front Panel (Left)
Air Filter
Front Cover
Storage Bin
Louver
Operation Panel
Door
1. CONSTRUCTION
2. ACCESSORIES
CD
1
Adjustable Leg
4
Power Supply Cord
1
Connector Cover
1
Scoop
1
Inlet Hose
1
Outlet Hose
1
3. UNPACKING
WARNING
Children should not be allowed in reach of the packaging elements (plastic bags and expanded polystyrene) as they are
potential sources of danger.
CAUTION
Do not lift or manoeuvre the carton by using the shipping bands.
When moving the unit by hand, remove the panels and hold the unit frame.
Always wear protective gloves when carrying the unit.
When handling the carton or the unpacked unit, work in pair to prevent injury.
NOTICE
Remove shipping carton, tape(s) and packing. If packing material is left in the icemaker, it will not work properly.
1) After removing the packaging, make sure that the icemaker and the storage
bin are in good condition. If in doubt, please do not use the icemaker but
apply to professionally qualified personnel.
2) Remove the shipping tape holding the door and front panel (left).
3) Open the door and remove the package of accessories. Check the contents
according to “2. ACCESSORIES”.
4) Remove the front panel (left) and top panel.
5) Remove the protective plastic film from the exterior. If the icemaker is exposed
to the sun or to heat, remove the film after the icemaker cools.
Top Panel:
Remove the screws and lift off.
Front Panel (Left): Remove the screws. Lift up
and pull toward you.
Top Panel
Front Panel
(Left)
Scoop
Power Supply Cord
CD
Adjustable Leg
Connector Cover
Inlet Hose
Outlet Hose
