11
Adjusting Channel Headings
The timeswitch has been preset without a channel heading on the
display. If you require either the ‘Water’ or ‘Heating’ options then
please follow the flowchart opposite.
General Information
RESETTING THE CHANNELPLUS H11XL SERIES 2
Electronic equipment can in some circumstances be affected by electrical interference.
If the display becomes frozen or scrambled; or if you wish to revert back to the default
settings please use the following procedure:
RESET PROCEDURE
PLEASE NOTE: Using this procedure will restore the ChannelPlus to the original factory
programme settings, the time setting will remain correct.
Press the green
‘SET’ button
Use the ‘+’ and ‘-’
buttons to adjust
‘HEADINGS’
Use the ‘+’ and ‘-‘
buttons to adjust
HEATING/WATER
OR NONE
Use the ‘+’ and ‘-’
buttons to select
‘SET DEFAULTS’
Open cover
Press ‘ENTER’
Press ‘ENTER’
Press ‘ENTER’
Press the green
‘SET’ button
Press the green
‘SET’ button
Close cover
ADVANCE
SELECT
BOOST
SAMPLE DISPLAYS
SET DEFAULTS
TIME AND DATE
CLOCK OPTIONS
HEADINGS
HEADINGS
NONE
HEATING
WATER
HEADINGS
WATER
Lower the front flap of the unit. On the right
hand Channel press the ADVANCE (Enter)
and SELECT (Blue) buttons together, then
release and the timeswitch will return to
the preset factory settings.
RESET
SET ON/OFF TIMES
SET HOLIDAY MODE
SET DEFAULTS
SET DEFAULTS
