10
Adjusting Clock Options
The timeswitch has been preset to display the time in 24 hour
clock format, should you prefer AM/PM format then please use
the procedure given in the flowchart
opposite.
General Information
BATTERY
The timeswitch is fitted with a non-rechargeable, non-serviceable long life battery,
which will maintain the clock and programmed time settings with the mains supply
disconnected.
THIS RESERVE SHOULD BE SUFFICIENT TO COVER POWER INTERRUPTIONS DURING THE LIFE OF
THE UNIT.
During power interruptions the display will be blank.
SERVICE AND REPAIR
This timeswitch is NOT user serviceable. Please do not dismantle the unit. In the unlikely
event of a fault developing please refer to the RESETTING THE CHANNELPLUS H11XL section
on the right. If this fails to resolve the problem please contact a local heating engineer or a
qualified electrician.
Press the green
‘SET’ button
Use the ‘+’ and ‘-’
buttons to adjust
‘CLOCK OPTIONS’
Use the ‘+’ and ‘-’
buttons to adjust
24 HRS OR AM/PM
Use the ‘+’ and ‘-’
buttons to select
‘SET DEFAULTS’
Open cover
Press ‘ENTER’
Press ‘ENTER’
Press ‘ENTER’
Press the green
‘SET’ button
Press the green
‘SET’ button
Close cover
SAMPLE DISPLAYS
SET ON/OFF TIMES
SET HOLIDAY MODE
SET DEFAULTS
SET DEFAULTS
TIME AND DATE
CLOCK OPTIONS
HEADINGS
CLOCK OPTIONS
24 HOURS
AM/PM
SET DEFAULTS
CLOCK OPTIONS
24 HOURS
