Maintenance location
Work instructions
Interval
Packer
Check packer bearings for tight fit.
daily
Check packer shafts for free rotation.
daily
Check packer segments for wear, deformation and
breakage.
daily
Readjust scraper, if so equipped.
as required
Undercarriage / wheels
Check for damage (cracks, etc.)
daily
Check fastening / retighten wheel nuts - see above
see above
Check air pressure
Packer tyres 7.50-16: 4.00 bar
Packer tyres 210/95-24: 4.50 bar
daily
Bearings of carrying axle journals
Check clearance and adjust if necessary (must only be
carried out by an expert workshop)
120 h /
6 months
TopRing Packer
Retighten the shaft nuts with 1000 Nm
daily
Rear drawing hook (option)
Check for wear (max. 3,2 mm) and tight fit.
before the
season
Wheels / brakes
Undercarriage / wheels
Check for damage (cracks, etc.)
daily
Check fastening / retighten wheel nuts - see above
see above
Check air pressure
• Undercarriage: 550/60-22.5 V Line 16 TL:
2.8 bar
• Support wheels: 400/60-15.5 TR 882 14 PR TL: 4.9 bar
daily
Bearings of carrying axle journals
Check clearance and adjust if necessary (must only be
carried out by an expert workshop)
120 h /
6 months
Brake system
Check setting and function
daily
Drain air reservoir
daily
Check brake lines and hoses for damages, crushing points
and kinks
daily
Clean the pipe filter
annually /
as necessary
Safety installations
Lighting and warning boards
Check condition and function
daily
Warning and safety stickers
Check that they are in place and legible
daily
At the end of the season
Complete machine
Perform care and cleaning work; do not spray plastic parts with oil or similar
Spray the piston rods of the hydraulic cylinder with a suitable corrosion
protection agent
Check all screw and plug-and-socket-connections for firm seating (see
torque table)
Check frame and connecting parts for condition and firm seating
Check electrical lines for damage and replace, if necessary.
Store terminal in a dry place
Brake system
Release parking brake, drain air reservoir, close brake lines, check
setting
Levelling discs
Spray mounting with penetrating oil
NOTES:
•
The maintenance interval
Daily
designates maintenance on each working day before each use and each road travel.
•
Follow additional maintenance notes in the respective chapters.
71
