horsch Joker RT Series, Owner'S Manual

Page: 23 / 50

23 | P a g e
Do not open or work (welding, drilling) on the pressure accumulator. Even after being emptied, the
accumulator is still preloaded by gas pressure.
Always depressurize the pressure accumulator before starting work on the hydraulic system. The
pressure gauge should not indicate any pressure.
The pressure gauge reading should drop to 0 psi. Only then may service be carried out on the hydraulic
system.
Changing Implements
• Secure the machine against unintended rolling!
• Secure lifted frame parts, under which you will be working, with suitable supports!
• Caution! Danger of injury caused by protruding parts (tines, discs)!
• Do not use the packer or other rotating parts when climbing onto the machine. These could start to
rotate and you could fall and be seriously injured.
In Operation
• Check the area around the machine (for children!) before setting off and starting operation of the
machine. Ensure sufficient visibility!
• Stay clear of the operating range of hydraulically operated parts.
• Passengers are not allowed to ride on the machine during operation!