horsch Finer SL, Operating Instructions Manual

Page: 38 / 58

7 | Operation
38 60056796 • 002 • 07/2021 • en
NOTE
Ø
Check all plug-and-socket connections (hydraulic, electric and pneumatic) for
cleanliness and firm seating.
Dirty connectors will contaminate the flowing media. The connectors there-
fore become worn and this results in malfunctions and failures in the connec-
ted assembly groups.
1. Clean the towing facilities of machine and tractor and check for wear.
2. Move the tractor to the machine and set the brake.
3. Couple the machine to the three-point of the tractor:
• Pick up the machine by the tractor link arm.
• Insert the securing device of the catching hooks.
• Lock the tractor link arms against movement sideways.
• Hook the upper link, depending on the tractor, into one of the holes and secure
it with the cotter pin.
4. Connect the hydraulic lines.
5. Connect the lighting system.
6. Lift the machine slightly to relieve the supports.
7. Push up all three supports and secure with bolt and cotter pin.
7.1.2 Transport position
WARNING
Danger of traffic accidents
Before driving off:
Ø Clean all picked up soil from the entire machine.
Ø
Check function of lighting system.
Ø
Lock the control units mechanically or electrically, depending on the version,
during transport travel. Never switch them to the floating position.
Ø Check all interlocks before starting to drive.
Ø
Check whether all securing elements of the connection are in place as set cor-
rectly.
Ø
Check components of the connection for wear.
NOTE
Ø
Make sure before driving on public roads that the machine meets all respect-
ive applicable national road traffic regulations.