Harrow
The machine is equipped with a harrow.
Harrow, 1-row
The incline or aggressiveness of the harrow can
be adjusted in 4 stages.
The working depth of the harrow can be adjusted
in 5 stages:
1
2
¾
Adjust the incline with the bolts (1). Secure
the bolts with cotter pins.
¾
Adjust the working depth with the bolts (2).
Secure the bolts with cotter pins.
Harrow, 3-row
The incline or aggressiveness of the harrow can
be adjusted hydraulically.
1
2
2
2
3
4
¾
Lift the machine.
¾
Extend the hydraulic cylinders completely.
¾
Depending on the required incline of the har
-
rows, plug on aluminium clips on all hydraulic
cylinders (1).
Plug on the same number and colour of clips
on all hydraulic cylinders.
¾
Fully retract the hydraulic cylinders during
use in the field.
In addition, the incline or aggressiveness of each
row can be adjusted individually:
¾
Remove all cotter pins at the respective row
(2).
¾
Align the row using a hole of the row of holes
according to the required incline.
¾
Insert all bolts and secure them with the cot-
ter pins.
The harrow can be installed horizontally or
slightly downward (3,
Workshop work
).
If the harrow is not needed, it can be installed
swivelled to the top (4,
Workshop work
).
36
