MAN0974-09-EN_XL7_UserManual
March 4
th
, 2019
Page 75 | 185
Figure 11.2
–
XL7 I/O Cover Removed (sample I/O board)
Once the back is removed the jumper selection can be changed. The jumper settings are
documented on each data sheet using a diagram such as Figure 11.3 below and a description of
the jumper settings.
Figure 11.3
–
Example Jumper Diagram
To re-install the cover, place the I/O cover back on the unit.
Place the screw back into the hole and turn the screw slowly counter clockwise until it clicks
into the threads. This prevents the screw from being cross-threaded. Now turn the screw clock-
wise until the cover is firmly secured. Repeat this process for all four (4) screws. Ensure not to
exceed the recommended max torque of 7-10 in-lbs [0.8
–
1.13 Nm].
J1
J2
J3
JP3
JP1
001XLE005-R1
J4
