HORNER XL7 OCS, User Manual

Page: 124 / 185

MAN0974-09-EN_XL7_UserManual
March 4
th
, 2019 Page 124 | 185
Table 14.3 – %SR Registers
Register Name Description Min Val Max Val
%SR178-179 Removable Media Indicates the total card capacity in K bytes. 0 2
31
%SR180 Reserved - - -
%SR181 ALM_UNACK
Unacknowledged Alarm (high bit indicates
what group #)
%SR182 ALM_ACT Active Alarm (high bit indicates what group #)
%SR183 SYS_BEEP System Beep Enable (0=disabled; 1=enabled) 0 1
%SR184 USER_BEEP Software configurable (0=OFF; 1=ON) 0 1
%SR185 SCR_SAVER Screen Saver Enabled (0=disabled; 1=enabled) 0 1
%SR186 SCR_SA_TM Screen Saver Time in minutes (delay) 5 1200
%SR187 NET_USE
Average Net Usage of all units on the CAN
network
0 1000
%SR188 NET_MIN
Minimum Net Usage of all units on the CAN
network
0 1000
%SR189 NET_MAX
Maximum Net Usage of all units on the CAN
network
0 1000
%SR190 NT_TX_AVG Average Net Usage of this unit 0 1000
%SR191 NT_TX_MIN Minimum Net Usage of this unit 0 1000
%SR192 NT_TX_MAX Maximum Net Usage of this unit 0 1000
%SR193 ONLINE_CHG Online Change
%SR193.1
TRUE if there are two ladder programs stored
in target Flash.
%SR193.2
TRUE to tell the target to switch the currently
executing program; target clears bit when
switch is complete.
%SR193.3
TRUE if currently executing program is a
temporary test program (that was loaded via
on-line programming,)
%SR193.4
TRUE during last scan of a ladder program
being switched from
%SR193.5
TRUE during first scan of a ladder program
being switched to
%SR193.6
TRUE to tell the target to revert back to the
program in Flash and delete all ladder
programs in RAM; target clears bit when
switch is complete.
%SR193.9 TRUE if there is error in temporary program
%SR194 CPU Frequency
%SR195 Max Die Temperature (115 is max)
%SR196
Charging State (0=Waiting, 1=Normal
Charging, >1=Special Condition)
%SR197 Charging Current Max mA
%SR198 Battery Voltage is mV
%SR209.3
WebMI Server Status. Bit 3 is ON if server
running.
%SR209.4
WebMI User Logged in Status. Bit 4 is ON if 1
or more users logged in.
%SR209.8-
209.16 Number of Users. Shows in upper byte in
decimal format.
%SR210
(R/W)
Time Zone: set in hours + / - UTC.
%SR211
(R/W) Daylight Saving: YES = 1
Daylight Saving: NO = 0
(If daylight saving is enabled, one
hour will be added to the local time).
%SR212 (R) UTC – Seconds