GENERAL WIRING DIAGRAM
•
CAUTION:
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power
supply.
Connec�ng panels to AC source supply:
All units must be individually connected to the AC supply.
Black = Line
Yellow = (Vaux 12V dc)
White = Neutral
Purple = (Dim+ 0-10V)
Green = Ground
Gray = (Dim- (NEG))
INSTALLATION & OPERATION
Electrical Connec�on:
1. Loosen the eight M6 hexagon bolts of Tank Cover with torque value 6 N-m.
2. The thread of entry hole of Tank is 3/4” NPT. A�ach the Tank to suitable conduit.
3. Inset the wire from outside through the conduit and the entry hole of Tank, then connect to Terminal Block.
4. Introduce the wires of branch circuit as following:
Black wiring connects to Line
White wiring connects to Neutral
Green wiring connects to Ground
5. Re-a�ach the Tank Cover and �ghten it by eight M6 hexagon bolts of Tank Cover with torque value 6 N-m.
6. Check the �ghtness of conduit and Tank Cover.
Product Size:
LMAN0073-01-EN
Hazardous Location Series
02/2021
Page 2
LED Driver
BLACK (LINE)
GREEN (GROUND)
WHITE (NEUTRAL)
AC INPUT
( - ) ( + )
LEAD WIRES
TO LED LOAD
Terminal
Block
Yellow (Vaux 12V dc)
Purple (Dim+ 0-10V)
Gray (Dim- (NEG))
Dimmer
316mm
316mm
230mm
287mm
243mm
243mm
270mm
270mm
