420 774 335 397 www.sharks-shop.cz Stránka
15
HANGING INSTRUCTIONS
1. Lay your Magnetic curtain flat on the floor with the magnets aligned in the centre, Note that
the top panel will have a larger gap between the magnets and the trim versus the bottom
panel.
2. Check each magnet to ensure they attract to each other symmetrically.
3. Peel the adhesive backing off one side of the hook and loop strips and apply to the top and
side of the Magnetic door curtain as indicated in Fig 1.
4. Take panel A of Magnetic door curtain and peel the adhesive backing off the hook and loop
strip 1 and apply to the centre of the door frame with pressure. Be sure to hang the door
curtain high enough so that is does not drag on the ground. Repeat the procedure for hook
and loop strips 2 and 3.
5. Take panel B of Magnetic door curtain and peel the adhesive backing off the hook and
loop strip 7 and apply opposite to 1 at centre of the door frame with pressure. Be sure to
hang the door curtain high enough so that it does not drag on the ground. Repeat the
procedure for hook and loop strips 8 an 9.
6. Ensure the magnets are properly aligned and connected in the centre.
7. Peel the adhesive backing off the hook and loop strips 4,5,6, and 10,11,12, and apply to
sides of door frame.
Helpful Tips
• For plastic frames, only use the hook and loop strips.
• For wooden frames, you can also use the wood tacks provided.
PLEASE NOTE: The wood tacks leave puncture holes in the frame.
• If magnets do not snap shut together, adjust the width positioning of the curtain.
CLEANING AND STORAGE
• Do not use any harsh or abrasive cleaners on this product.
• Wipe off the mesh with a damp, lukewarm cloth. For stubborn dirt, you can spot clean with
a small amount of soap and a cloth. Allow the mesh to air-dry.
• Do not put in tumble dryer. Do not dry clean!