Component
1
Base (30pcs lens)
2
Protective ring
3
Insulating spacer
4
3 Pin connector
5
Constant voltage driver
6
SMT LED board
7
Snake shape lens
8
Milky lamp shade
9
Lamp frame
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Deutschland
www.hornbach.com
Dispose of the individual components according to
the applicable regulations!
II.
III.
IV.
Caution: Disconnect from power mains prior to
any operations on the device.
Dismounting
1.
Unscrew the base
1
from the Milky lamp shade
8
.
2.
Remove the protective ring
2
.
3.
Loosen the screws of the 3 Pin connector
4
and
remove it together with the insulating spacer
3
.
4.
Remove the screws from the SMT LED board
3
.
5.
Pinch off the plastic pins that hold the SMT LED board
6
and the snake shape lens
7
and remove both.
6.
Remove the lamp frame
9
from the milky lamp shade
8
.
Required tools
Cross-tip screwdriver
Screwdriver
Pliers
10445861 - LED-CEILING LUMINAIRE
Dismounting and disposal
I.
1.
2.
3.
4.
5.
6.
7.
8.
9.
English
Warning: The following work must be per-
formed by a qualified electrician.
