Fully open the awning using the remote
control.
The opposite sketch illustrates the
position of the front bar in a fully
opened awning (the opening of the
awning should stop when the arms are
fully opened, and the fabric is still
tensioned) and the winding direction of
the fabric.
Make sure the front bar is leveled using
a sprit level.
If not, verify that the installation
brackets are correctly leveled and all
arms have the same pitch angle.
Caution
:
-Do not touch moving parts of the
awning during manipulation.
- Do not place or attach anything to the
awning.
- Do not manually force any parts of the
awning to move.
II.6. Verification of the awning’s configuration
II.5. Overview of the remote control
Symbol
Action
Awning
control
Close
Open
Pause
Channel
selection
Left
Right
The awning is delivered with pre-set
limit switches.
ENGLISH | 43
