CALIBRATION
• For optimal performance, turn
unit on and allow 5-15 minutes to
warm up.
• Verify powder pan has been
removed, and that the red scale
plate is empty.
• Press
ZERO/CALIBRATE
button for
three seconds until unit displays
“CAL ---“
.
• When
10.00g
is flashing, place
the 10g weight on the center of
the scale plate. The unit will show
“---- --”
while calibrating the
10g weight.
• When
10.00g
appears again,
remove the weight.
• When
50.00g
is flashing, place
the 50g weight on the center of
the scale plate. The unit will show
“---- --” while calibrating the
50g weight.
• When
50.00g
appears again,
remove the weight
• After calibration, the unit will
briefly display
“PASS”
before
returning to normal operation.
6
