DRYER USE AND CARE
Caution: Do not put the blower in water or in the dishwasher.
• Set the base tray on a sturdy countertop or table away from sinks or
any source of water.
• Stack additional trays on the base tray. Your dryer requires a
minimum of five trays to operate properly.
• Place the top cover on the top tray, insert the blower into the trays
and rotate to lock in place
• Plug the cord into an electrical outlet, switch power to
ON
and you’re
ready to start drying cases and gun parts.
Trays and Top Cover
— Your dryer trays and top lid are easy to clean.
Simply soak the trays in warm water with a mild detergent for several
minutes. Do not clean trays with any metal objects or scouring pads as
they tend to damage the surface of the trays.
Blower
— It is important that the air vents on the blower remain clean
and unobstructed.
UNPLUG BLOWER BEFORE CLEANING.
Do not use
scouring pads, abrasive cleaners or sharp utensils. Avoid dripping
any liquid into electrical parts. Do not operate blower alone, or use in
any capacity other than the intended use.
DO NOT OPERATE NEAR OR
IMMERSE BLOWER IN WATER OR OTHER LIQUID.
TIME AND TEMPERATURE ADJUSTMENT
Time
— The Hornady Digital Cases & Parts Dryer features an
adjustable digital timer. The drying time can be adjusted from 15 minutes
to 2 hours by pressing the
TIME
button.
Temperature
— Most metal parts can be dried at the preset 158°F
temperature. For sensitive items, start at the lowest temperature to
prevent damage. To adjust the temperature setting, press the
TEMP
button to cycle through the 7 temperature settings.
On/Off
— Press and release the
ON/OFF
button to turn the dryer
on and off.
NOTE:
Unplug dryer when not in use.
