background image

 

Page 1 of 4 

 

X1TXP1UC 2.4GHz Module User Manual. 

 

Horizon Hobby, LLC  

4105 Fieldstone Rd 

Champaign, IL 61822 

1. Features 

 

 

  2.4GHz Frequency Hopping Spread Spectrum (FHSS) radio transceiver module 

 

  Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band 

 

  Fully integrated power regulation with a wide input unregulated operating range 3V to 

10V. 

 

  Fully integrated local oscillator and 12MHz 20ppm reference crystal 

 

  200mA operating current 

 

  Transmit power - 100mW EIRP 

 

  Receive sensitivity up to -95dBm 

 

  DSSS data rates up to 250kbps 

 

  1 mile operating range 

 

  Full packet assembling and disassembling 

 

  Auto transaction sequencer 

 

  Fully buffered digital interface with high voltage tolerant inputs 

 

2. Pin description 
 
Pin Number  Name

Description

GND 

Module Ground 

VCE 

Power control monitoring 

VIN 

Module DC Power 

P21 

Baseband CPU digital port P2.1

P33 

Baseband CPU digital port P3.3 

P17 

Baseband CPU digital port P1.7 

P32 

Baseband CPU digital port P3.2 

GND 

Module Ground

P30 

Baseband CPU digital port P3.0 

10 

XRES 

Baseband CPU reset input 

11 

P11 

Baseband CPU digital port P1.1 

12 

P10 

Baseband CPU digital port P1.0

 

Summary of Contents for X1TXP1UC

Page 1: ...mW EIRP Receive sensitivity up to 95dBm DSSS data rates up to 250kbps 1 mile operating range Full packet assembling and disassembling Auto transaction sequencer Fully buffered digital interface with high voltage tolerant inputs 2 Pin description Pin Number Name Description 1 GND Module Ground 2 VCE Power control monitoring 3 VIN Module DC Power 4 P21 Baseband CPU digital port P2 1 5 P33 Baseband C...

Page 2: ... Module User Requirements 4 1 This module must be integrated into a device where the user cannot access the antenna connector 4 2 Only a 2 0dBi antenna can be used with this module The antenna must meet and not exceed the gain and pattern of the supplied folded dipole antenna 4 3 The device must contain the following permanent labeling on the exterior of the device as follows Contains FCC ID BRWX1...

Page 3: ...a separation distance of at least 5cm between the antenna and the body excluding hands wrists The instructions to the user for the host device must include information requiring the product be used in a manner to ensure the appropriate separation 20cm or 5cm between antenna and body and requiring that the transmitter not be collocated with another transmitter FCCInformationtoOEMintegrator The OEM ...

Page 4: ...ents the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi transmitter product procedures 2 Only those antennas with same type and lesser gain filed under this IC number can be used with this device 3 T...

Reviews: