7
EN
Before the fi rst fl ights, or in the event of an
accident, make sure control surfaces are
centered when the transmitter controls and
trims are neutral. The transmitter sub-trim must
be set to zero.
Adjust the linkages mechanically
if the control surfaces are not centered. Use of the
transmitter sub-trims may not correctly center the
aircraft control surfaces due to the mechanical
limits of linear servos.
• Make the U-shape narrower to make the
connector shorter. Make the U-shape wider to
make the linkage longer.
• Ensure that the leading edge of both the
horizontal stabilizers are 1mm above the lower
edge of the side panel, as shown in the image to
the right.
Control Centering
1mm
Factory Control Horn Settings
The illustration shows the factory settings for
linkages on the control horns. Linkage connections
on the control horns directly affect aircraft response.
Taileron
Rudder
