EN
3
Spektrum Remote Receiver
The SPM9745 and SPM9746 remote receivers are compatible with Spektrum
DSMX radio control systems. They can be connected to any DSMX Spektrum
receiver with a remote receiver connector. They are not compatible with DSM2
receivers.
For more information on Spektrum radio control system visit:
http://www.spektrumrc.com
Binding instructions
Always use DSMX
®
remote receivers with DSMX main receivers.
Connecting New Remote Receivers
1. Connect a Remote Receiver Extension to the main receiver and remote receiver.
2. Install the receiver in a location as far as possible from the main receiver antenna.
3. Install the active portion of the antenna (the exposed section at the end of
the antenna wire) so it is oriented 90 degrees to the main receiver antenna.
It should be installed as far as possible from metal, carbon fiber, and wiring.
WARNING:
Do not kink, cut or damage the antenna wire. The
antenna is made of a coaxial wire; if the outer sheath becomes
damaged, the receiver will not work properly. If the antenna is damaged in
any way, replace the antenna before attempting to use the receiver.
4. Follow the receiver binding instructions to bind the main receiver and
remote receiver(s).
The transmitter and receiver will need to be re-bound any time a new remote
receiver is added to the system.
