EN
Landing Gear Installation (Tail Dragger Option)
1. Install the main landing gear assembly (
A
) on the fuselage as shown using
2 screws (
B
).
2. Install the tail wheel (
C
) in the rudder mount as shown. Secure it in place
by tightening the set screw (
D
) on the flat spot of the strut with a 1.5mm
hex wrench.
Model Assembly
Continued
Landing Gear Installation (Tricycle Gear Option)
1. Remove the 2 wing screws (
A
) from the wing and install the main gear (
B
)
on the wing.
2. Secure the main gear and wing into place with the 2 wing screws.
3. Install the nose gear (
C
) in the nose, tightening the set screw (
D
) on the fl at
spot of the strut with a 1.5mm hex wrench.
C
D
A
B
D
C
B
A
L
di
G
I t ll ti
(T i
l G
O ti
)
7
