Horizon Hobby LOSB0126 Manual Download Page 20

20

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase cannot provide 

warranty support or repair. Once assembly, setup or use of the 

Product has been started, you must contact Horizon directly. 

This will enable Horizon to better answer your questions and 

service you in the event that you may need any assistance. 

For questions or assistance, please direct your email to 

[email protected], or call 877.504.0233 toll 

free to speak to a service technician.

Inspection or Repairs

If this Product needs to be inspected or repaired, please call for 

a Return Merchandise Authorization (RMA). Pack the Product 

securely using a shipping carton. Please note that original 

boxes may be included, but are not designed to withstand the 

rigors of shipping without additional protection. Ship via a 

carrier that provides tracking and insurance for lost or damaged 

parcels, as Horizon is not responsible for merchandise until it 

arrives and is accepted at our facility. A Service Repair Request 

is available at www.horizonhobby.com on the “Support” tab. 

If you do not have internet access, please include a letter with 

your complete name, street address, email address and phone 

number where you can be reached during business days, your 

RMA number, a list of the included items, method of payment 

for any non-warranty expenses and a brief summary of the 

problem. Your original sales receipt must also be included for 

warranty consideration. Be sure your name, address, and RMA 

number are clearly written on the outside of the shipping 

carton.

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales 

receipt verifying the proof-of-purchase date. Provided warranty 

conditions have been met, your Product will be repaired or 

replaced free of charge. Repair or replacement decisions are at 

the sole discretion of Horizon Hobby.

Non-Warranty Repairs

Should your repair not be covered by warranty the repair will be 

completed and payment will be required without notification 

or estimate of the expense unless the expense exceeds 50% 

of the retail purchase cost. By submitting the item for repair 

you are agreeing to payment of the repair without notification. 

Repair estimates are available upon request. You must include 

this request with your repair. Non-warranty repair estimates will 

be billed a minimum of 1/2 hour of labor. In addition you will 

be billed for return freight. Please advise us of your preferred 

method of payment. Horizon accepts money orders and 

cashiers checks, as well as Visa, MasterCard, American Express, 

and Discover cards. If you choose to pay by credit card, please 

include your credit card number and expiration date. Any 

repair left unpaid or unclaimed after 90 days will be considered 

abandoned and will be disposed of accordingly. Please note: 

non-warranty repair is only available on electronics and model 

engines.

United States:

Electronics and engines requiring inspection or repair should be 

shipped to the following address:

Horizon Service Center

4105 Fieldstone Road

Champaign, Illinois 61822

USA

All other Products requiring warranty inspection or repair 

should be shipped to the following address:

Horizon Product Support

4105 Fieldstone Road

Champaign, Illinois 61822

USA

Please call 877-504-0233 or e-mail us at productsupport@

horizonhobby.com with any questions or concerns regarding 

this product or warranty.

United Kingdom:

Electronics and engines requiring inspection or repair should be 

shipped to the following address:

Horizon Hobby UK

Units 1-4 Ployters Rd

Staple Tye

Harlow, Essex

CM18 7NS

United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@

horizonhobby.co.uk with any questions or concerns regarding 

this product or warranty.

Summary of Contents for LOSB0126



























Reviews: