EN
12
Turbo Timber Evolution 1.5m
Control Surface Direction
Aileron stick
Rudder stick
Elevator stick
Switch on the transmitter and connect the battery. Use the transmitter to operate
the aileron, elevator, and rudder controls. View the aircraft from the rear when
checking the control directions.
Ailerons
1. Move the aileron stick to the left. The right aileron should move down and the
left aileron up, which will cause the aircraft to bank left.
2. Move the aileron stick to the right. The right aileron should move up and the left
aileron down, which will cause the aircraft to bank right.
Elevators
3. Pull the elevator stick back. The elevator should move up, which will cause the
aircraft to pitch up.
4. Push the elevator stick forward. The elevator should move down, which will
cause the aircraft to pitch down.
Rudder
5. Move the rudder stick to the left. The rudder should move to the left, which will
cause the aircraft to yaw left.
6. Move the rudder stick to the right. The rudder should move to the right, which
will cause the aircraft to yaw right.
Control Horn and Servo Arm Settings
The table to the right shows the factory settings for the control horns and servo
arms. Fly the aircraft at factory settings before making changes.
NOTICE:
If control throws are changed from the factory settings, the AR637T
gain values may need to be adjusted. Refer to the Spektrum AR637T manual for
adjustment of gain values.
After flying, you may choose to adjust the linkage positions for the desired control
response. See the table to the right.
Horns
Arms
Elevator
Elevator
Flaps
Elevator
Flaps
Ailerons
Elevator
Flaps
Not Accessible
Rudder
Elevator
Flaps
Elevator
Flaps
Flaps
Elevator
Flaps
Not Accessible
More control throw
Less control throw
Elevator
Flaps
Tail wheel
Summary of Contents for E-FLITE Turbo Timber Evolution 1.5m
Page 78: ...IT 78 Turbo Timber Evolution 1 5m ...
Page 79: ...IT 79 ...
