EN
9
Model Assembly
Continued
Foot Step Installation
1. Press the right and left foot steps (
A
) into the slots in the fuselage with the
tab facing to the front of the aircraft.
2. Secure the right and left foot steps into place with 3 x 8mm self tapping
screws (
B
).
Disassemble in reverse order.
Antenna Installation
1. Apply medium CA to the base of the belly antenna (
A
) and press it into the
slot on the bottom of the fuselage.
2. Apply medium CA to the base of the top fuselage antenna (
B
) and press it
into the respective slot in the top of the fuselage.
3. Apply medium CA to the base of the wing antenna (
C
) and press it into the
respective slot in the right wing.
A
A
B
C
Propeller Installation
1. Remove spinner nut and washer from propeller shaft.
2. Slide the propeller (
A
), and washer (
B
) onto the motor shaft (
C
).
3. Install and tighten the spinner nut (
D
) using an adjustable wrench (13mm).
4. Slide the spinner (
E
) onto the shaft in front of the propeller.
5. Secure the spinner with the spinner screw M3 x 10mm (
F
).
Disassemble in reverse order.
A
D
E
F
C
B
3 X 8mm
B
