EN
Model Assembly
Continued
Main Wing Installation
1. Secure each wing strut to the wing using the inluded nut
(A)
and
bolt
(B)
. Note the orientation of the fuselage end of the strut. The wedge
end of the strut should be oriented as shown in the illustration.
2. Slide the wing tube (
C
) into the hole in the wing pocket above the cockpit.
3. Align the wing halves
(D)
with the recess of the fuselage and fit the wing
to the fuselage.
4. Align the wing struts
(E)
to each side of the fuselage and secure them into
place with the pin
(F)
and R-clip
(G)
.
5. Secure both wing halves into place using the 2 thumb screws
(H)
. Install
them from the inside of the fuselage going out into the wing.
6. Re-install the top hatch.
When needed, disassemble in reverse order.
C
D
H
B
2.5 X 20mm
B
G
R-clip
E
F
A
2.5M nut
YES
NO
8
