Horizon Hobby Blade Inductrix Switch Air BNF, Instruction Manual

Page: 7 / 19

7
EN
RTF
Transmitter Control
A B C D E F
Mode 1
Aileron (Left/Right)
Throttle (Up/Down)
Throttle
Trim Aileron
Trim Rudder
Trim Elevator
Trim Rudder (Left/Right)
Elevator (Up/Down)
Mode 2
Aileron (Left/Right)
Elevator (Up/Down)
Elevator
Trim Aileron
Trim Rudder
Trim Throttle
Trim Rudder (Left/Right)
Throttle (Up/Down)
Mode
selection
• Bind
• Long press:
Arm/Disarm
D
E
F
Power LED indicator
C
B
A
On/Off Switch
When pressed down, trim buttons make a sound that increases or decreases in pitch at each pressing. The middle or
neutral trim position is heard as a middle tone in the pitch range of the sounds. The end of the control range is sounded
by a series of beeps.
M
se
LED Codes
Equipment LED Color LED Status Operation
Flight control LED on
the control board, RGB
Red Solid Position 2; Quadcopter AS3X mode
Purple Solid Position 1; Quadcopter Horizon mode
Blue Solid Position 0; Quadcopter Stability mode
Green Solid IDX Switch mode 1
Amber Solid IDX Switch mode 2
White Solid Air mode
Green Blinks for 1 second at power ON Battery voltage check; Full
Orange Blinks for 1 second at power ON Battery voltage check; Middle
Red Blinks for 1 second at power ON Battery voltage check; Low
Blue Blinking rapidly Bind mode
Blue Blinking slowly 2.4GHz signal lost, Low voltage warning
Front LEDs White
Blinking rapidly Bind mode
Solid Arm
Blinking slowly Disarm
Blinking slowly 2.4GHz signal lost, Low voltage warning
Rear LEDs Red
Blinking rapidly Bind mode
Solid Arm / Disarm
Blinking slowly 2.4GHz signal lost, Low voltage warning