Horizon Hobby Blade 150 S Instruction Manual Download Page 3

3

EN

Table of Contents

Length

14.4 in (365mm)

Height

5 in (128 mm)

Main Rotor Diameter

14.2in (360 mm)

Tail Rotor Diameter

2.5 in (64mm)

Flying Weight

7.1oz (200 g)

Specifications

Components

BNF- Basic (BLH5450)

Airframe  

Blade 150 S

Included

Main Motor

1310-5800Kv Brushless (BLH3417)

Installed

Tail Motor

Brushless (BLH9311)

Installed

Receiver

Blade 150 S AS3X

®

/ SAFE

®

 receiver (BLH5449)

Installed

ESC

Dual Brushless ESC (BLH5448)

Installed

To receive product updates, special offers, and more, register your product online,visit www.bladehelis.com

First Flight Preparation ...................................................... 4
Flying Checklist ................................................................ 4
Transmitter Setup Table .................................................... 4
Transmitter Setup Table (continued) .................................. 5
Installing the Flight Battery ............................................... 6
Transmitter and Receiver Binding ...................................... 6
Technology ....................................................................... 7
Flight Mode and Rate Selection ......................................... 7
Panic Recovery ................................................................. 7
Throttle Hold  .................................................................... 8
Control Tests  .................................................................... 8
Understanding the Primary Flight Controls ........................ 9
Flying the 150 S.............................................................. 10
Advanced Settings  ......................................................... 11
Advanced Settings (continued) ........................................ 12

Advanced Settings (continued) ........................................ 13
Servo Adjustment  .......................................................... 14
Trim Flight ...................................................................... 15
Calibration Procedure ..................................................... 16
Post-Flight Inspection and Maintenance Checklist ........... 17
Troubleshooting Guide .................................................... 17
Exploded View ................................................................ 19
Parts List ........................................................................ 19
Recommended Parts List ................................................ 19
Optional Parts List ........................................................... 20
Limited Warranty ............................................................ 20
Warranty and Service Contact Information ...................... 21
FCC Information .............................................................. 21
IC Information ................................................................. 22
Compliance Information for the European Union .............. 22

Box Contents

• Blade

®

 150S (BLH5450)

Required Items

•  DSM2 / DSMX compatible transmitter
•  450mAh 3S 11.1V 50C Li-Po Battery
•  3S Li-Po compatible battery charger

Summary of Contents for Blade 150 S
























Reviews: