background image

14

EN

Yak 54 3D manual

Limitation of Liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, 

INDIRECT, INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, LOSS OF PROFITS OR PRODUCTION OR 

COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF 

WHETHER SUCH CLAIM IS BASED IN CONTRACT, 

WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR 

ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON 

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGES. Further, in no event shall the liability of 

Horizon exceed the individual price of the Product 

on which liability is asserted. As Horizon has no 

control over use, setup, final assembly, modification 

or misuse, no liability shall be assumed nor accepted 

for any resulting damage or injury. By the act of use, 

setup or assembly, the user accepts all resulting 

liability. If you as the purchaser or user are not 

prepared to accept the liability associated with the 

use of the Product, purchaser is advised to return the 

Product immediately in new and unused condition to 

the place of purchase.

Law

These terms are governed by Illinois law (without 

regard to conflict of law principals). This warranty 

gives you specific legal rights, and you may also have 

other rights which vary from state to state. Horizon 

reserves the right to change or modify this warranty 

at any time without notice.

WARRANTY SERVICES

Questions, Assistance, and Services

Your local hobby store and/or place of purchase 

cannot provide warranty support or service. Once 

assembly, setup or use of the Product has been 

started, you must contact your local distributor or 

Horizon directly. This will enable Horizon to better 

answer your questions and service you in the event 

that you may need any assistance. For questions 

or assistance, please visit our website at www.

horizonhobby.com, submit a Product Support Inquiry, 

or call the toll free telephone number referenced in 

the Warranty and Service Contact Information section 

to speak with a Product Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced 

and is compliant in the country you live and use the 

Product in, please use the Horizon Online Service 

Request submission process found on our website 

or call Horizon to obtain a Return Merchandise 

Authorization (RMA) number. Pack the Product 

securely using a shipping carton. Please note that 

original boxes may be included, but are not designed 

to withstand the rigors of shipping without additional 

protection. Ship via a carrier that provides tracking 

and insurance for lost or damaged parcels, as Horizon 

is not responsible for merchandise until it arrives 

and is accepted at our facility. An Online Service 

Request is available at http://www.horizonhobby.com/

content/service-center_render-service-center. If you 

do not have internet access, please contact Horizon 

Product Support to obtain a RMA number along with 

instructions for submitting your product for service. 

When calling Horizon, you will be asked to provide 

your complete name, street address, email address 

and phone number where you can be reached during 

business hours. When sending product into Horizon, 

please include your RMA number, a list of the included 

items, and a brief summary of the problem. A copy 

of your original sales receipt must be included for 

warranty consideration. Be sure your name, address, 

and RMA number are clearly written on the outside of 

the shipping carton. 

NOTICE: Do not ship LiPo batteries to Horizon. If 

you have any issue with a LiPo battery, please 

contact the appropriate Horizon Product Support 

office.

Warranty Requirements 

For Warranty consideration, you must include 

your original sales receipt verifying the proof-of-

purchase date.

 Provided warranty conditions have 

been met, your Product will be serviced or replaced 

free of charge. Service or replacement decisions are 

at the sole discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, 

service will be completed and payment will be 

required without notification or estimate of the 

expense unless the expense exceeds 50% of the 

retail purchase cost

. By submitting the item for 

service you are agreeing to payment of the service 

without notification. Service estimates are available 

upon request. You must include this request with your 

item submitted for service. Non-warranty service 

estimates will be billed a minimum of ½ hour of labor. 

In addition you will be billed for return freight. Horizon 

accepts money orders and cashier’s checks, as well 

as Visa, MasterCard, American Express, and Discover 

cards. By submitting any item to Horizon for service, 

you are agreeing to Horizon’s Terms and Conditions 

found on our website http://www.horizonhobby.com/

content/service-center_render-service-center. 

ATTENTION: Horizon service is limited to Product 

compliant in the country of use and ownership. 

If received, a non-compliant Product will not be 

serviced. Further, the sender will be responsible 

for arranging return shipment of the un-serviced 

Product, through a carrier of the sender’s choice 

and at the sender’s expense. Horizon will hold 

non-compliant Product for a period of 60 days 

from notification, after which it will be discarded.

10/15/15

Summary of Contents for Bind-N-Fly AS3X UMX A-10




















Reviews: