Step
17
24
A
. If the Aerobird 3
™
keeps turning to the
left and adjusting the trim control lever
(page 20) does not correct enough to fly
straight with the stick at neutral:
1. Adjust the control linkage so that the left
tail flap is 1/16" above the rest of the tail
surface.
2. Test fly.
3. If it still flies to the left, repeat the above
procedure, adding 1/16" each time until
it flies straight.
B
. If the Aerobird 3 keeps turning to the
right and adjusting the trim control lever
(page 20) does not correct enough to fly
straight with the stick at neutral:
1. Adjust the control linkage so that the
right tail flap is 1/16" above the rest of
the tail surface.
2. Test fly.
3. If it still flies to the right, repeat the
above procedure, adding 1/16" each
time until it flies straight.
IMPORTANT:
If there is a bend (even a small one) in the tail or wing or a tear near the flap
areas, it is impossible to have correct flight control. Replace the damaged part immediately!
Making Adjustments—Plane Turns to the Left or Right
Summary of Contents for AerBird3
Page 1: ...Instruction Manual...
