8
9
NYLON NUT (C)
Qty: 6
FLAT WASHER (B)
Qty: 12
BOLT (A)
Qty: 4
BOLT (D)
Qty: 2
SUPPORT PLATE
Qty: 2
ASSEMBLY
STEP 1
A Place
BASE FRAME
on floor in desired location.
B Remove 6
NYLON NUTS (C)
and 6
FLAT WASHERS
(B)
from
BASE FRAME
.
C Attach
RIGHT MAIN SUPPORT FRAME
to right side
of
BASE FRAME
using 2
FLAT WASHERS (B)
and 2
NYLON NUTS (C)
.
D Repeat on other side.
E Attach
CENTER SUPPORT FRAME
to
BASE FRAME
using 2
FLAT WASHERS (B)
and 2
NYLON NUTS (C)
.
A Open
HARDWARE BAG 1
.
B Attach
UPPER PULLEY ASSEMBLY
to
CENTER
SUPPORT FRAME
using 2
BOLTS (D)
, 4
FLAT
WASHERS (B)
and 2
NYLON NUTS (C)
. Tighten this
hardware.
C Position
LAT BAR BRACKET ASSEMBLY
in line
with the
UPPER PULLEY ASSEMBLY
and the
LEFT
SUPPORT FRAME
and
RIGHT SUPPORT FRAME
as
shown. Using 4
BOLTS (A)
, 8
FLAT WASHERS (B)
and
4
NYLON NUTS (C)
attach
SUPPORT PLATES
,
LAT
BAR BRACKET ASSEMBLY
and
UPPER PULLEY
ASSEMBLY
to the
LEFT SUPPORT FRAME
and
RIGHT SUPPORT FRAME
as shown.
ASSEMBLY
STEP 2
HARDWARE BAG 1 CONTENTS:
BASE FRAME
MAIN SUPPORT
FRAME (RIGHT)
MAIN SUPPORT
FRAME (LEFT)
NYLON NUT (C)
FLAT WASHER (B)
CENTER SUPPORT
FRAME
LAT BAR
BRACKET ASSEMBLY
UPPER PULLEY ASSEMBLY
FLAT WASHER (B)
NYLON NUT (C)
FLAT WASHER (B)
SUPPORT
PLATE
BOLT (A)
FLAT WASHER (B)
BOLT (D)
FLAT WASHER (B)
NYLON NUT (C)
