Horizon Fitness T-PRO, Owner'S Manual, Page: 17 / 36

17
CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should
be removed before use.
A) LARGE LED DISPLAY WINDOW
: displays workout time.
B) ALPHANUMERIC DISPLAY WINDOW
: displays incline, distance, speed, calories,
pace, workout profile and heart rate.
C) START
: press to begin exercising, start your workout, or resume exercising after pause.
D) STOP
: press to pause/end your workout. Hold for 3 seconds to reset the console.
E) INCLINE KEYS
: used to adjust incline in small increments (0.5% Increments).
F) SPEED + – KEYS
: used to adjust speed in small increments (0.1 MPH or 0.1KM/H
increments).
G) QUICK ADJUST KEYPAD
: used to reach desired speed or incline more quickly.
H) SET INCLINE KEY
: used to change incline to level entered into keypad.
I) SET SPEED KEY
: used to change speed to level entered into keypad.
J) ENTER / CHANGE DISPLAY KEY
: Press to confirm programming selections during
workout setup. Press to change display feedback during workout.
K) AUDIO IN JACK
: plug your media player into the console using the included audio
adaptor cable.
L) AUDIO OUT / HEADPHONE JACK
: plug your headphones into this jack to listen to
your music through the headphones.
M) USB PORT
: insert USB stick here to update software.
N) READING RACK
: holds reading material.
O) MEDIA PLAYER HOLDER
: holds your media player.
P) WATER BOTTLE POCKETS
: holds personal workout equipment.
Q) SAFETY KEY POSITION
: enables treadmill when safety key is inserted.
R) ENERGY SAVER
: To minimize energy consumption, your machine will enter energy
saver mode automatically(after entering stand-by mode for 15 mins) and could be
quickly waken up with a touch of a button.
1
3
2
0
4
6
5
7 9 8
SET
INCLINE
STEIGUNG EINSTELLEN
SET
SPEED
GESCHWIN DIGKEIT
EINSTELLEN
QUICK ADJUST KEYPAD (G)
Quickly access any speed or
incline level by typing the number
and pressing SET SPEED (I)
or SET INCLINE (H) keys.
Examples:
• To change the speed to 6.5
MPH or KM/H, press 6–5–SET
SPEED.
• To change the incline to 10%,
press 1–0–0–SET INCLINE.
(NOTE: If there is no decimal
point, you still must enter 0).