110
111
A Open
HARDWARE FOR STEP 3.
B Slide
SEAT RAIL END CAP (10) onto SEAT RAIL (5).
C Attach
SEAT STOP BUMPERS (G) to SEAT RAIL
(5) using 2 BOLTS (F) and 1 BUSHING (H).
4
F
10
5
G
F
G
H
3
ASSEMBLY COMPLETE!
OXFORD 3
OXFORD 6
Hardware For Step 3
Description
Qty
F
G
H
Bolt (15L)
Seat Stop Bumper
Bushing
2
2
1
ENGLISH
A Open
HARDWARE FOR STEP 1. Remove STYROFOAM
BLOCK (1) from carton and rest MAIN FRAME
(3) on STYROFOAM BLOCK (1) as shown.
B Attach
FRONT STABILIZER (2) to MAIN FRAME (3) using 4
BOLTS (A), 4 SPRING WASHERS (B). and 4 FLAT WASHERS (C).
C Attach
FOOTPAD ASSEMBLY (4) to SEAT RAIL (5) using 4 BOLTS
(D), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
D Attach
REAR STABILIZER (6) to SEAT RAIL (4) using 4 BOLTS
(D), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
C
B
A
2
3
C
B
D
4
5
6
1
Hardware For Step 1
Description
Qty
A
B
C
D
Bolt (25 mm)
Spring Washer
Flat Washer
Bolt (15 mm)
4
12
12
8
1
2
E
B
C
8
1
5
9
7
3
A Open
HARDWARE FOR STEP 2.
B Oxford 6 only: Connect the
SEAT RAIL WIRES (7).
C Slide
SEAT RAIL (5) into the MAIN FRAME (3) as shown.
D Attach
SEAT RAIL (5) to MAIN FRAME (3) using 4 BOLTS
(E), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
E Snap
MAIN FRAME COVER (8) into place.
F Slide seat and
SEAT FRAME ASSEMBLY (9) onto SEAT RAIL (5).
G Remove and discard
STYROFOAM BLOCK (1).
Hardware For Step 2
Description
Qty
E
B
C
Bolt (85 mm)
Spring Washer
Flat Washer
4
4
4
ENGLISH
Tighten all 6 bolts
HZ18_OM_Oxford_3_6_r1_1_B.indd 110-111
9/5/18 1:31 PM